2x 3/4 inch x 1/8 inch x 4 feet alumnium and 2x 1.5 inch x 1/8 inch x 3 feet aluminum
<-- Previous Step 1 Next Step -->
  • 2x 3/4 inch x 1/8 inch x 4 feet alumnium and 2x 1.5 inch x 1/8 inch x 3 feet aluminum
    Step 1
  • Bar Measurements
    Step 2
  • Small Drill Holes
    Step 3
  • Large Drills Holes
    Step 4
  • Joint
    Step 5
  • Joint
    Step 6
  • Bent Frame
    Step 7
  • Padded Harness
    Step 8
  • Hole
    Step 9
  • Harness Base
    Step 10
  • Extender
    Step 11
  • Extension
    Step 12
  • Extension
    Step 13
  • Harness
    Step 14
  • More Padding
    Step 15
  • Sanded
    Step 16
  • Slide
    Step 17
  • Connect Parts
    Step 18
  • Harness and Frame
    Step 19
  • Final
    Step 20

Parts

• 2x 3/4 inch x 1/8 inch x 4 feet aluminum
• 2x 1.5 inch x 1/8 inch x 3 feet aluminum

Directions

a. With the hacksaw, cut the 3/4 inch bar in half.
b. With the hacksaw, cut two 11 inch sections from the 1.5 inch Bar.

Feedback

No feedback has been left yet.


20